E-Newsletter
Subscribe Now
  ABOUT US   |   CONTACT US   |   SUBSCRIPTION CENTRE   |   ADVERTISE   |   SITEMAP
MAGAZINE
Current Issue
Past Issues
Digital Magazine
News Archives
Web Exclusives
 
MARKETPLACE
Job Board
Classifieds
Product News
COMMUNITY
Blog
Events
 
RESOURCES
E-Newsletter
Links
Sitemap
 
Gasification method turns forest waste into biofuels
July 5, 2013 – Lignocellulosic biomass can be used in the production of high-quality biofuels for the price of less than one euro per litre, according to research results of the VTT Technical Research Centre of Finland.

A new technology developed in Finland allows the transfer of more than half the energy of wood raw materials to the end-product. The technology is considered ready for the construction of a commercial-scale production plant in Europe.

VTT has assessed the techno-economics of the production of renewable liquid transportation fuels from forest residues. The case studies focused on the production of four biofuels using a method based on pressurized fluidized-bed gasification. The fuels studied were methanol, dimethyl ether (DME), Fischer-Tropsch liquids and synthetic gasoline.

The results show that the production of renewable biofuels from lignocellulosic biomass, mainly bark and forestry residues, could achieve an energy efficiency of 50 per cent, depending on the end-product and process conditions. Should the thermal energy produced as a by-product be exploited for district heat or industrial steam, for example, the overall efficiency from biomass to saleable energy products could reach 74 per cent.

Based on the case studies, the research scientists estimated that once commercialized the technology can be used to produce liquid transportation fuel at the cost of 58 €/MWh. Converted into gasoline-equivalent price per litre, the estimated production cost would be 0.5.7 €/litre. The price of renewable solutions would thus be on a level with the current pre-tax price of fossil transportation fuels, and cheaper than existing imported biofuels.

Each case study design was based on a BTL plant with 300 MW capacity, the equivalent of a large district heating power plant. A biorefinery of this size could produce liquid transportation fuel for about 150,000 cars. The EU has set a target of 10 per cent renewable energy content for the transportation sector by 2020. For Finland, the target is 20 per cent.

After long-term development work, the technical functionality of the production process was verified through extensive testing at VTT test rigs as well as industrial piloting in Finland and in the U.S. The technology is now ready for its first commercial-scale demonstration. However, the first wave of these ground-breaking production plants requires significant public venture capital investment, for which planning has consequently been initiated at both Finnish and EU level.

According to the research results, the best efficiency and lowest production costs were achieved in the production of biomethanol. The risks related to the commercialisation of the synthesis technology were also estimated to be lower with the biomethanol production plant compared to the other options.

Methanol is an alcohol fuel that can be used in modern cars at maximum 3 vol-% content in combination with petrol or, as with ethanol, in high concentrations in FlexFuel cars designed for this purpose. Methanol can also be further converted to synthetic gasoline or used as renewable raw material in the manufacture of various chemicals and biomaterials.

 

 
Submit News Release