Komatsu introduces new WA380-8 wheel loader
July 14, 2015 - Komatsu America Corp. recently introduced the new WA380-8 wheel loader.
With a 6.69 litre, 191-HP Komatsu SAA6D107E-3, variable geometry, turbocharged and after-cooled Tier 4 Final certified engine, the WA380-8 uses up to six per cent less fuel than its Tier 4 Interim predecessor.
Komatsu’s SmartLoader Logic software combines with a lockup torque converter, which activates in second, third and fourth gears. Together, the system is designed to provide optimal engine torque for improved acceleration, hill climbing, a higher top speed and fuel savings.
“With one of the highest breakout forces in its class and excellent balance, this machine is made for tough digging tasks,” said Craig McGinnis, Komatsu America product manager. “The WA380-8 is ideal for carrying pipe, sand and other aggregates, site clean up and support, digging into piles and backfilling.”
Komatsu designed the machine’s Komatsu Diesel Particulate Filter (KDPF) and other after treatment components to work in harmony with the engine for efficiency and long life. A selective catalyst reduction (SCR) assembly is incorporated to further reduce NOx emissions using diesel exhaust fluid (DEF). The engine uses an advanced electronic control system to manage the air-flow rate, fuel injection, combustion parameters and after treatment functions to optimize performance, reduce emissions and provide advanced diagnostic capability.
In-cab enhancements and features include:
•A new, air-suspension, high-back, heated seat that softens machine vibrations for operator comfort, and cast frame members for increased strength;
•Seat-mounted electronic pilot control levers with F-N-R switch for operator comfort and convenience;
•Pioneering Komtrax telematics system and monitor that provides key machine metrics, including KDPF status, DEF-level data, fuel consumption, plus performance information collected and sorted by operator ID;
•Komatsu auto idle shutdown to reduce idle time and save fuel;
•Auxiliary jack and two 12-volt ports;
•A seven-inch, full colour, high-resolution monitor with ecology guidance to support more efficient machine operation; and
•A dedicated, full colour, seven-inch, rear-view monitor comes standard.
Additional features and benefits
•Swing out cooling fan with wider fin spacing and standard auto-reversing fan for ease of cleaning;
•Gull-wing engine doors that provide quick, convenient access for daily checks and service items;
•Full-rear fenders are standard; and
•Additional hinged panels at each side of the machine for easy access to regeneration components.
The WA380-8 and every other Komatsu Tier 4 Final construction-sized machine, whether rented, leased or purchased, is covered by the Komatsu CARE program for the first three years or 2000 hours, whichever comes first. Komatsu CARE includes scheduled factory maintenance, a 50-point inspection at each service, and up to two complimentary KDPF exchanges and up to two DEF tank flushes in the first five years. With all labour, fluids and filters covered by Komatsu over this period, Komatsu CARE lowers ownership costs, raises resale value and improves equipment uptime and availability.
Komatsu America Corp. is a U.S. subsidiary of Komatsu Ltd. Through its distributor network, Komatsu offers a state-of-the-art parts and service program to support its equipment. Komatsu has proudly provided high-quality reliable products for nearly a century. For more information, visit www.komatsuamerica.com.
Note: All comparisons and claims of improved performance herein are made with respect to the prior Komatsu model unless otherwise specifically stated. Materials and specifications are subject to change without notice.
©2015 Komatsu America Corp. All rights reserved. Komatsu America is an authorized licensee of Komatsu Ltd. KOMATSU, KOMTRAX and Komatsu CARE are registered trademarks of Komatsu Ltd. All other trademarks and service marks used herein are the property of Komatsu Ltd., Komatsu America Corp., or their respective owners or licensees.
VTT develops new wood gasification method to produce biofuel, chemicalsJan. 15, 2019 - VTT Technical Research Centre of Finland…
Changing demand for wood fibre is impacting U.S. residuals markets: reportJan. 11, 2019 - As global consumer trends and demands…
New product offers end-to-end ecosystem for supply chain managementJan. 11, 2019 - Trimble today released its Connected Forest…
Portugal building CHP stations to reduce risk of forest firesJan. 14, 2019 -The European Commission has approved, under EU…
Author Henry Persson to speak at BC silo fire risks symposiumJan. 16, 2019 - WorkSafeBC and the Wood Pellet Association…
Biomass Trade and Power Europe
February 12-13, 2019
Pursuing Added Value for Alberta Biomass
February 20-21, 2019
Argus Biomass Asia
March 5-7, 2019
International Biomass Conference and Expo
March 18-20, 2019
World Bio Markets
April 1-3, 2019
Argus Biomass 2019
April 8-10, 2019